China High Quality Small Slitting Machine Manufacturer – QFJ-A1300 Horizontal Type Slitting Rewinding Machine (1300mmwidth, 200m/Min) – JINYI Manufacturer and Supplier

High Quality Small Slitting Machine Manufacturer – QFJ-A1300 Horizontal Type Slitting Rewinding Machine (1300mmwidth, 200m/Min) – JINYI

Short Description:

Product Detail

Product Tags

Feedback (2)

The organization upholds the philosophy of "Be No.1 in good quality, be rooted on credit history and trustworthiness for growth", will keep on to provide previous and new customers from home and overseas whole-heatedly for 600mm Width Slitting Rewinding Machine, 1100mm Width Laminating Machine, Auto Register Rotogravure Printing Machine, While using the improvement of society and economy, our corporation will retain a tenet of "Focus on trust, high quality the first", moreover, we count on to make a glorious long run with each and every customer.

High Quality Small Slitting Machine Manufacturer – QFJ-A1300 Horizontal Type Slitting Rewinding Machine (1300mmwidth, 200m/Min) – JINYI Detail:

Basic Parameter

No.	Model	QFJ-A1300	Unit	Remark
1.	Suitable material	For Plastic film and Paper slitting and rewinding
2.	Material thickness range	0.02-0.1	MM
3.	Machine effective width	1300	mm
4.	Guider roller width	1350	mm
5.	Unwind diameter	800 (MAX)	mm
6.	Rewind diameter	600(MAX)	mm
7.	Max Slitting speed	200m/min	m/min	According material
8.	Unwind tension range	10—200	N
9.	Unwind tension control	constant tension
10.	Rewind tension control	Taper tension
11.	EPC	guide with edge
12.	Correction accuracy/slitting accuracy	±0.3/±0.2	mm
13.	Correction stroke	± 70	mm
14.	Coiling method	Center coil, with pneumatic pressure roller
15.	Feeding method	With shaft loading raw material ,air cylinder lift and down
16.	Unloading method	Rewinding shaft can both use ,rotate unload(shaft no need unload),also can shaft whole take off
17.	Unwind paper core	3	Inch(mm)	Paper core
18.	Winding paper core	3	Inch(mm)	Paper core
19.	Raw material width	300-1300	mm
20.	Meter accuracy	±1/1000	m
21.	Unwind Tension	100*1set	N.M
22.	Rewinding Tension	100*2set	N.M
23.	Traction motor	5.5	KW
25.	total power	6.5	Kw
26.	voltage	AC 380±5%,50HZ	V
27	Air source air pressure	8	Mpa
28.	Device body color	White
29.	control panel color	black
30.	Waste suction fan	0.75KW high pressure fan
33.	equipment weight	About 3000 Kg

Function description

Unwinding part
> Unwinding method: The material roll is lifted and lowered by an air cylinder. Conjoined rack, rack thickness 30mm.
> Unwinding correction: The machine adopts an analog correction system to track the edge of the material.
> Deviation adjustment device: The unwinding aluminum guide roller has a longitudinal deviation adjustment device, so that the material can run parallel to the guide roller to the maximum extent, and ensure the winding accuracy and quality.
> Unwinding tension detection: Hall switch, cooperate with pneumatic brake to realize unwinding tension. The unwinding warp is detected by the Hall switch, the output torque is calculated, and the tension is automatically calculated by the PLC.
> Unwinding control: The control of this machine has the functions of starting, stopping, speed regulation, unwinding residual material alarm and unwinding tension adjustment.
> Meter counting: The encoder is used to detect the working length, which has the advantages of high precision and high resolution. Considering the production process requirements, the program design has functions such as accumulative meter counting and automatic shutdown when the number is reached.
>Transition guide roller: Transition drive aluminum roller with diamond-shaped cross line on the surface, which makes the material more smooth and compliant during high-speed operation.

Winding device
＞Rewinding method: 3-inch inflatable shaft to realize automatic tension control.
＞Rewinding tension: Rewinding tension control adopts magnetic powder clutch, automatic taper tension control, synchronous belt drive
＞Back pressure roller: The rewinding contact pressure roller is controlled by a cylinder, and the contact roller pressure is controlled by a precision pressure regulating valve. The contact pressure roller is of steel structure, and the air pressure can be adjusted according to the winding requirements.

Slitting device

＞Slitting tool: round knife and flat knife
＞Number of round knives: 10 sets each type .

Electrical and Pneumatic Devices

>Drive: The drive part is driven by a high-performance variable frequency motor, combined with a matching variable frequency controller to control the
control to achieve high precision speed.
>Control: The host computer adopts PLC program control, and the man-machine interface sets the operation parameters and monitors the operation status.
＞Interface: using touch screen man-machine interface

Other configuration

> This machine adopts high-strength, low-stress steel wallboard with a thickness of 30mm. The wall panel has been relieved of secondary stress and has good stability.
> All the rotating parts of the machine use well-known domestic bearings.
>The mechanical parts of this machine are processed by the machining center and CNC machine tools.
>Emergency stop button and emergency pull switch are installed at the operation place of this machine.

Main component brands and models

NO.	Component Name	Component model	QTY	BRAND
1.	Correction device		1set	Bianfu
3.	Unwind brake	200N.M	1set	China
4.	Hall sensor		1set	China
6.	Rewinding Tension	100N.M	1set	China
7.	Drive frequency conversion	HY series	1set	Delixi
8.	Traction motor	5.5KW	1set	China
9.	touch screen	MT series	1piece	MCGS
10.	PLC and its modules	XMZ series	1set	Siemens
11.	Cylinder and Solenoid Valve		1set	Airatc
12.	Oil Cylinder	CHD2F series	2piece	China
13.	bearing		1set	Japan SNK
14.	rubber roller		Several	China
15.	Aluminum guide roller		Several	China

Spare parts

NO.	Name	Specification	QTY	UNIT
1	oiler		1	piece
2	open end wrench	8-10	1	piece
3	open end wrench	12-14	1	piece
4	open end wrench	17-19	1	piece
5	open end wrench	22-24	1	piece
6	Allen key	1.5-10	1	set（lengthen type）
7	Flat-blade screwdriver		1	piece
8	Phillips screwdriver		1	Piece

QFJ-A1300-Horizontal-Type-Slitting-Rewinding-Machine-(1300mmwidth,-200m-Min)05

Product detail pictures:

Related Product Guide:
What Should Be Paid Attention When Using The Slitting Machine?

We not only will try our best to offer excellent services to every customer, but also are ready to receive any suggestion offered by our customers for High Quality Small Slitting Machine Manufacturer – QFJ-A1300 Horizontal Type Slitting Rewinding Machine (1300mmwidth, 200m/Min) – JINYI , The product will supply to all over the world, such as: Russia, Madagascar, Macedonia, We've got constructed strong and long co-operation relationship with an enormous quantity of companies within this business overseas. Immediate and specialist after-sale service supplied by our consultant group has happy our buyers. In depth Info and parameters from the merchandise will probably be sent to you for any thorough acknowledge. Free samples may be delivered and company check out to our corporation. n Portugal for negotiation is constantly welcome. Hope to get inquiries type you and construct a long-term co-operation partnership.

220v Controller To Slitter Rewinder Machine