The slitting machine was initially driven by a large motor, but the speed of this driving force could not be adjusted, and at the same time, it was accompanied by high-speed friction to generate high temperature, which was not conducive to the continued processing and production of products. The control is developed to double motors and three motors, which is more stable and efficient under the condition of faster machine speed. Next, let’s go with JINYI to see more details about the slitting machine.
The principle of slitting machine
The paper slitting machine needs to perform fixed-length slitting processing on the whole roll or the entire raw material, such as plastic packaging materials, packaging cartons, steel plates, films, leather, wood chips, etc., which must be controlled by fixed-length slitting.
The slitting length can be set continuously. If there is an error in the actual slitting length, it is easy to calibrate by setting parameters.
The slitting control of the paper slitting machine is divided into static and dynamic slitting: when the set length is reached, it will stop accurately, then statically slit, and restart the operation after slitting; when the set length is reached, it will not stop and send out Slitting signal, the slitting machine performs dynamic slitting processing during the material movement.
Operating requirements of the slitting machine
1. The slitting machine is to perform fixed-length slitting processing on the whole roll or the entire raw material.
2. Fixed-length slitting control is divided into static and dynamic slitting.
3. The most important performance index of fixed-length slitting is the slitting accuracy, and the finished product length is consistent.
4. The slitting length can be set continuously. If there is an error in the actual slitting length, it is easy to calibrate by setting parameters.
The calibration method of slitting machine
The slitting machine needs to perform fixed-length slitting processing of the entire roll or the entire raw material, such as plastic packaging materials, packaging cartons, steel plates, films, leather, wood chips, etc., which must be controlled by fixed-length slitting. The fixed-length slitting control is divided into static and dynamic slitting: when the set length is reached, the machine will stop accurately, then statically cut and process, and restart the operation after slitting; when the set length is reached, the slitting will be issued without stopping the machine. Signal, the slitting machine performs dynamic slitting processing during the material movement. The most important performance index of fixed-length slitting is the slitting accuracy, and the finished product length is consistent. The slitting length can be set continuously. If there is an error in the actual slitting length, it is easy to calibrate by setting parameters. Slitting machine setting control: set the slitting menu according to the film type, thickness, length, width, etc. arranged in the slitting plan; pick up the corresponding BOPP film file from the PDF; set the winding length and width of the corresponding specification film; Select the corresponding winding station, adjust the pressure roller arm and pressure roller, and install the paper core of the corresponding specification.
The above is the entire content of this article. I believe that after reading the whole text, you have already understood the working principle, operation requirements and calibration method of the slitting machine. More information will be continuously updated by JINYI, and we will see you in the next issue.
Post time: May-16-2022